EPE Foam Recyling Machine | EPE Foam Pelletizer
The EPE foam recycling machine /EPE Foam Pelletizer（EPE Foam Granulating Machine） is equipment that turns EPE foamed waste plastic (edge trim, head scrap, and discarded products) into valuable resources through crushing, extrusion, and pelletizing. It is an ideal choice for product factories, supermarkets, and residential areas looking for environmentally friendly solutions. The machine adopts processes such as high-speed compression, rapid melting, degassing, and extrusion filtration. The pellets produced can be reused for manufacturing EPE foam. Jinlida Machinery's recycling machine can handle various types of EPE waste and is priced between 68,000 and 200,000 RMB.
EPE foam recyling machine main technical parameters:
Extruder specifications mm | 100 | 125 |
Output kg/h | 150—200 | 200--250 |
Installed capacity kw | 65 | 75 |
Extruder power kw | 37 | 45 |
Pelletizing power kw | 1.5 | 1.5 |
weight T | ≈1.5 | ≈1.7 |
Export standard packing
1.Use the PE foam sheet pack every part to make sure every part can not damage
2.Easy rust parts coating anti-rust oil then laminate with strech film
3.Use wood fix every part in container to make sure them can not move
4. Plastic film suitable for shipping
5.As per customer's request
FAQ For EPE Foam Recyling Machine/ EPE Foam Pelletizer（EPE Foam Granulating Machine）
Q: Can the EPE foam recycling machine(EPE Foam Pelletizer/EPE Foam Granulating Machine) turn waste into new material?
A: Yes. The recycled granules can be reused as raw material for EPE foaming machines, typically added at a ratio of 10–30%.
Q: What is the output of the EPE foam recycling machine(EPE Foam Pelletizer/EPE Foam Granulating Machine)?
A: It depends on the model. Different models have different outputs. Currently, the output ranges from approximately 200 to 1,000 kg per hour.
Q: Does the EPE foam recycling machine(EPE Foam Pelletizer/EPE Foam Granulating Machine) require a separate crusher?
A: It depends on the situation. If the waste is already foamed EPE edge trim, the recycling machine comes with a built-in simple crushing and feeding system — you can feed the waste directly. However, if the waste is unfoamed or low-butane head scrap (hard material), a separate crusher is needed. This is because unfoamed head scrap is essentially melted and cooled hard plastic, which is quite rigid. The crusher built into the recycling machine is only designed for breaking down foamed waste.
Q: What is the approximate cost of recycling one ton of waste?
A: The main costs are electricity and labor, totaling about 300–500 RMB per ton. In comparison, new material costs around 8,000–12,000 RMB per ton, so recycling can significantly reduce costs.
Why Choose Us
China manufacturer of EPE foam machinery since 2003.EPE foam machine not only have covered all over China, but also have exported to more than 70 countries
Would you like to take a closer look at our offer?
You May Like:
We are making EPE Foam Recyling Machine | EPE Foam Pelletizer factory, manufacturer & supplier & exporter.We specialize in making EPE foam machine for over 20+ years
